Pērlīšu un apģērba rotājumu pēdiņa
Radošam darbam ar pērlīšu un rotājumu lentām līdz 4mm platumā. Malas iedobe kalpo par vadīklu vai arī izmantojama auklu iešūšanai.
Radošam darbam ar pērlīšu un rotājumu lentām līdz 4mm platumā. Malas iedobe kalpo par vadīklu vai arī izmantojama auklu iešūšanai.
This accessory is compatible with the following machines:
1. Set the machine for a 3-thread rolled hem or 3-thread flatlock (left needle for wider beads, right needle for smaller beads).
2. Beads up to 5/32” (4 mm) diameter can be used.
3. Adjust stitch length to suit beads and pearls.
4. Raise the presser foot and snap on “Beading and Sequin foot”.
5. Place strand of beads/sequins in the guide (1) and (2) to the end of the foot.
6. Lower the foot, sew a few stitches to fix it.
7. Place the fabric under the foot and sew.
"8. Note: If the strand of beads is sewn onto the fabric edge, cutting can be activated. If the strand of beads is sewn on with a flatlock,
fold the fabric accordingly and guide about 1.5 mm from the right of the needle, it should penetrate the fabric edge. Cutting can be deactivated if needed."
Funkcijas |